Reduced Next Day Shipping

Nagaoka MP-300H Moving Magnet Cartridge

    Description

    The Nagaoka MP-300H is a high-end moving magnet phono cartridge, which delivers sophistication, refinement and high definition at all audible frequencies thus making it a favorite phonograph cartridge and a must have for the true vinyl lover and enthusiast.

    It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300H is an advanced technology cartridge that is destined to become a classic out of the box.

    Utilising an exclusive, super-rigid body, the MP-300H delivers ultra resonance and superb fidelity and fine detail recovery, aided by a superfine polished special elliptical bonded diamond stylus and a powerful samarium cobalt magnet. The hardened-low mass, high strength boron cantilever offers impeccable tracking.

    The time for the stylus replacement JN-P300 varies depending on how often and how it is used.  For general use at home the expected time is between 150-200 hours which by then the stylus will begin to wear and the tone quality starts to deteriorate. It is recommend to replace the stylus as early as possible so you can enjoy clear music  and cause no damage to the disc grooves.

    Features

    • Exclusive super rigid body for ultra resonance and superb fidelity
    • Superfine polished special elliptical bonded diamond stylus
    • Powerful samarium cobalt magnet
    • Hardened low-mass, high strength boron cantilever
    • Carbon fiber reinforced plastic shoe
    • Anti ferrous magnetic Permalloy shield casing

      Specifications

      Type Moving Permalloy
      Cantilever High-strength boron
      Stylus Type Superfine elliptical diamond 0.4 x 0.7mm
      Weight 8g
      Headshell weight 13.5g
      Output voltage: 1kHz, 5cm/sec: 3mV
      Frequency response: 20Hz - 25kHz
      Channel balance 1kHz: >1dB
      Channel separation 1kHz: >25dB
      Recommended loading 47k ohms
      Dynamic compliance  7.2 x 10.6cm /dyne
      Static compliance 20 x 10.6cm /dyne
      Tracking force range 1.3 - 1.8g

      Nagaoka MP-300H Moving Magnet Cartridge

        Product form

        £729.00 Incl. VAT

        3 in stock Delivered less than 36 hours

        • Dispatch today? Order within: May 17, 2024 14:00:00 +0100

          Description

          The Nagaoka MP-300H is a high-end moving magnet phono cartridge, which delivers sophistication, refinement and high definition at all audible frequencies thus making it a favorite phonograph cartridge and a must have for the true vinyl lover and enthusiast.

          It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300H is an advanced technology cartridge that is destined to become a classic out of the box.

          Utilising an exclusive, super-rigid body, the MP-300H delivers ultra resonance and superb fidelity and fine detail recovery, aided by a superfine polished special elliptical bonded diamond stylus and a powerful samarium cobalt magnet. The hardened-low mass, high strength boron cantilever offers impeccable tracking.

          The time for the stylus replacement JN-P300 varies depending on how often and how it is used.  For general use at home the expected time is between 150-200 hours which by then the stylus will begin to wear and the tone quality starts to deteriorate. It is recommend to replace the stylus as early as possible so you can enjoy clear music  and cause no damage to the disc grooves.

          Features

          • Exclusive super rigid body for ultra resonance and superb fidelity
          • Superfine polished special elliptical bonded diamond stylus
          • Powerful samarium cobalt magnet
          • Hardened low-mass, high strength boron cantilever
          • Carbon fiber reinforced plastic shoe
          • Anti ferrous magnetic Permalloy shield casing

            Specifications

            Type Moving Permalloy
            Cantilever High-strength boron
            Stylus Type Superfine elliptical diamond 0.4 x 0.7mm
            Weight 8g
            Headshell weight 13.5g
            Output voltage: 1kHz, 5cm/sec: 3mV
            Frequency response: 20Hz - 25kHz
            Channel balance 1kHz: >1dB
            Channel separation 1kHz: >25dB
            Recommended loading 47k ohms
            Dynamic compliance  7.2 x 10.6cm /dyne
            Static compliance 20 x 10.6cm /dyne
            Tracking force range 1.3 - 1.8g

            The Joe Audio Promise

            As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

            • The latest and greatest equipment available at all times
            • FREE shipping anywhere within the UK
            • Specialist advice available from our customer service team

            Recently viewed products

            Login

            Forgot your password?

            Don't have an account yet?
            Create account