Audio-Technica AT-LP3 AUTOMATIC BELT-DRIVE STEREO TURNTABLE

SKU
ATLP3
£199.00

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

Payment Types


A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.



  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM

  • Balanced straight tonearm with hydraulically damped lift control and lockable rest

  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable

  • Switchable modes for moving magnet and moving coil cartridges

  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell

  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat

  • Damped base construction for reduced low-frequency feedback colouration




 



MM / MC CARTRIDGE SELECTOR SWITCH


Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.





 



AT91R DUAL MOVING MAGNET CARTRIDGE


Specially designed for the LP3, the AT91R Dual Moving Magnet™ phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.




UNIVERSAL HEADSHELL


Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2" mount cartridges and 4-pin turntable arms.




BALANCED TONEARM


Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.




4.5MM PLATTER MAT


Reducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.



More Information
Brand Audio-Technica
Power Consumption 2W
Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
Tracking Force Range 1.5 to 2.5g (standard 2.0g)
Dimensions 435 mm ×353 mm×128 mm (W×D×H)
Warranty 2 Years
Wow & Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise > 60 dB
Effective Tonearm Length 221.5mm
Pre-Fitted Cartridge Audio-Technica AT91R
Replacement Stylus Audio-Technica ATN91R
Platter Die-cast aluminium
Output “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Power Supply 220 to 240 V / 50, 60 Hz
Tonearm Static balanced straight shaped with soft damping control
Included Accessories Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
Speeds 33-1/3 RPM, 45 RPM
Headshell AT-HS3
Type Fully Automatic, Belt-Drive
Motor DC motor
Phono Pre-Amp Gain 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised
Manufacturer Audio-Technica
Write Your Own Review
You're reviewing:Audio-Technica AT-LP3 AUTOMATIC BELT-DRIVE STEREO TURNTABLE