Klipsch WA-2 wireless subwoofer kit
Powerful bass is one thing, but powerful bass that can be placed anywhere in a room to achieve the best possible sound is another.
Powerful bass is one thing, but powerful bass that can be placed anywhere in a room to achieve the best possible sound is another. Thanks to the new WA-2 wireless subwoofer kit, convenient bass enhancement of music, home theater and whole-house audio systems is now possible. This accessory is meant to add simplistic wireless capability to the already superior performing Klipsch subwoofers, including the R-115SW, R-112SW, R-110SW.
A COMPLETE SOLUTION
The WA-2 Wireless Subwoofer kit comes with everything you need to wirelessly send bass and/or low frequency effects information from your home theater receiver/processor or stereo receiver* to a compatible Klipsch Group, Inc. (KGI) subwoofer equipped with a WA Port. Current KGI subwoofers with a WA Port include: Klipsch SW-110, SW-112, SW-308, SW-310, SW-311 Energy ESW-M6, ESW-M8, Mirage MM-6, MM-8 Jamo Sub 800.
NO MORE LONG, BULKY SUBWOOFER CABLES
The WA-2 wireless subwoofer kit makes adding a subwoofer to a new or existing speaker system much easier. It replaces the need for a long, thick, costly subwoofer cable that traditionally must be connected between a receiver or processor and a subwoofer.
IT ALLOWS FOR BEST SUBWOOFER PLACEMENT
Easily place the subwoofer where it both sounds and looks best in the room since you’re not restricted by a speaker cable. Up to 4 WA-2’s can be used simultaneously in an average size household
2.4 GHz OPERATION WITH DYNAMIC CHANNEL SELECTION
The wireless signal transmits flawlessly within a 50’ (15m) radius using an advanced automatic channel selection technology. Even if you have a wireless network or wireless phone system, the WA-2 wireless subwoofer kit does not interfere with, nor has interference from, any other wireless systems in your home.
NO MANUAL “PAIRING” REQUIRED
Unlike other designs that require a manual “pairing” step, the WA-2 wireless subwoofer kit’s transmitter finds the receiver automatically once you connect it and turn it on the first time.
GAIN CONTROL ALLOWS OPERATION WITH MANY DIFFERENT RECEIVERS
The transmitter’s input gain control compensates for varying output levels of different receivers/processors, allowing maximum performance in any system.
*Stereo receiver must have line level outputs for right and left channels to attach to the WA-2 transmitter.
- Allows for powerful bass extension with fewer wires
- Hassle-free setup
- Plug ‘n play functionality
- Compatible with select Klipsch, Energy, Mirage and Jamo subwoofers equipped with a “WA Port”
- Up to 4 WA-2's can be used simultaneously in an average size household
|Frequency Response||15 -150 Hz +0/-3 dB|