SURPRISE Special Treat @ CHECKOUT Plus Reduced Next Day Shipping

Audioquest Black Lab Subwoofer Cable

    Description

    METAL-LAYER NOISE-DISSIPATION

    It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

    SYMMETRICAL COAX GEOMETRY
    Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

    COLD-WELDED, GOLD-PLATED TERMINATIONS
    This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
     
    SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
    Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

    FOAMED-POLYETHYLENE INSULATION
    Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

     Specifications

     Metal LGC
    Conductor Solid Conductors
    Geometry Symmetrical Coax
    Dielectric Foamed-Polyethylene
    Noise-Dissipation Metal-Layer Noise-Dissipation
    Jacket Black PVC with White Stripes
    Termination Cold-Welded, Gold-Plated

    Read more

    Audioquest Black Lab Subwoofer Cable

      Product form

      £48.95£42.00 Incl. VAT

      2 in stock Delivered less than 36 hours

      • Dispatch today? Order within: Apr 27, 2024 14:00:00 +0100

        Description

        METAL-LAYER NOISE-DISSIPATION

        It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

        SYMMETRICAL COAX GEOMETRY
        Identical positive (+) and negative (-) conductors prevent the shield from being used as an inferior audio conductor.

        COLD-WELDED, GOLD-PLATED TERMINATIONS
        This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
         
        SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
        Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

        FOAMED-POLYETHYLENE INSULATION
        Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

         Specifications

         Metal LGC
        Conductor Solid Conductors
        Geometry Symmetrical Coax
        Dielectric Foamed-Polyethylene
        Noise-Dissipation Metal-Layer Noise-Dissipation
        Jacket Black PVC with White Stripes
        Termination Cold-Welded, Gold-Plated

        Read more

        The Joe Audio Promise

        As a specialist supplier of some of the greatest equipment to our customers, we set ourselves high standards that match our amazing products and always strive to offer..

        • The latest and greatest equipment available at all times
        • FREE shipping anywhere within the UK
        • Specialist advice available from our customer service team

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account