- Optimised sound reproduction and high level of sonic accuracy
- R 18µm Nude Spherical stylus that is an optimal solution for playing mono microgroove LP vinyl records
- Also available with integrated headshell or verso version
2M Series
The 2M Series of cartridges from Ortofon have been designed for precise and accurate retrieval of the information in the record groove. Indeed, it is Ortofon's lasting philosophy to only ever play the recorded sound, without colouration. The pre-existing range of 2M cartridges have rapidly been established as a reference point for all good moving magnet cartridges. From the introductory Red, through to the high-end Black; 2M is now a go-to name in moving magnet technology. 2012 sees Ortofon open up new markets within the same design principle of 2M. The 2M 78 and 2M Mono offer users of older, rare vinyl a higher-quality playback medium than had previously been available.
The 2M Mono features an improved Mono engine, which provides a high level of sonic accuracy. The meticulously cut R 18µm Nude Spherical stylus is also an optimal solution for playing mono microgroove vinyl records. Re-open a whole world of Mono recordings with 2M.
Each 2M cartridge model is also available as a 2MR variant. Here, the "R" stands for “Reduced” and relates to the lower cartridge body height. This is suited to certain types of tonearms from manufacturers such as Pro-Ject, Linn and Rega, in order to achieve the correct VTA. To learn more about whether the 2MR might be useful for your system, visit our handy technical page Ortofon 2MR - The Technical Argument Suitable For Riga Turntables
Features
- Optimised sound reproduction and high level of sonic accuracy
- R 18µm Nude Spherical stylus that is an optimal solution for playing mono microgroove LP vinyl records
- Uses a strapped output to deliver the same output signal from both sets of pole pins
- Supplied with 2 different sets of screws (M2.5 x 5 & M2.5 x 7)
- Stylus brush included
- Also available with integrated headshell or verso version
2M Verso
The 2M series of cartridges are now also available in a special version, suited for bottom-mount tonearms. The 2M Verso are available to special order.
Specifications
| Output Voltage (at 1kHz, 5cm/sec): |
4mV |
| Frequency Range (at -3dB): |
20Hz - 22kHz |
| Frequency Response 20Hz - 20kHz: |
+3 / -1dB |
| Tracking Ability at 315Hz: |
Typically 70μm |
| Compliance, Dynamic, Lateral: |
18μm / mN |
| Stylus Type: |
Nude Spherical |
| Stylus Tip Radius R: |
18μm |
| Tracking Force Range: |
1.6 - 2.0g (16 - 20mN) |
| Recommended Tracking Force: |
1.8g (18mN) |
| Tracking Angle: |
20º |
| Internal Impedance / DC Resistance: |
700Ω |
| Internal Inductance: |
350mH |
| Recommended Load Resistance: |
47kΩ |
| Recommended Load Capacitance: |
150 - 300pF |
| Cartridge Colour Body / Stylus: |
Black / White |
| Cartridge Weight: |
7.2g |
| Replacement Stylus Unit: |
Stylus 2M Mono |
| Accessories: |
Screwdriver
Stylus Brush |
|
2M Mono
|
2MR Mono
|
2M Mono Premounted
|
| Differing Key Features |
| Reduced-height 2MR cartridge body |
No |
Yes |
No |
| Overhead mounting cartridge for installing into a headshell |
Yes |
Yes |
No |
| Moving magnet cartridge with removable stylus |
Yes |
Yes |
Yes |
| Supplied pre-installed on a headshell for easy installation |
No |
No |
Yes |
| Special "verso" model for bottom-mount headshells |
No |
No |
No |
| Utilises Ortofon's split-pole pin technology to reduce the eddy current and to get a flat frequency response, like with an MC cartridge |
Yes |
Yes |
Yes |
| Anti-resonant Hopelex body |
Yes |
Yes |
Yes |
| Replacement stylus only |
No |
No |
No |
| Common Key Features |
| Optimised mono output cartridge |
| Nude spherical diamond stylus |
|
| Differing Specifications |
| Cartridge Weight |
7.2 g |
6 g |
16.7 g |
| Replacement Stylus For |
|
|
|
| Common Specifications |
| Output Voltage (@ 1000Hz, 5cm/sec.) |
4 mV |
| Frequency Range (@ -3dB) |
20 - 22000 Hz |
| Frequency Response +3 / -1dB |
20 - 20000 Hz |
| Tracking Ability (@ 315Hz at Recommended Tracking Force) |
70 μm |
| Compliance, Dynamic, Lateral |
18 μm |
| Stylus Type |
Nude Spherical |
| Tracking Force Range |
1.6 - 2.0 g |
| Recommended Tracking Force |
1.8 g |
| Tracking Angle |
20 ° |
| Internal Impedance |
700 Ω |
| Internal Inductance |
350 mH |
| Cantilever Material |
Aluminium Tube |
| Recommended Load Impedance |
47000 Ω |
| Recommended Load Capacitance |
150 - 300 pF |
Downloads
Product Info Sheet
User Guide
